1.8 Storage
Under certain circumstances, instructions for storage, which go beyond the
requirements listed here, can be found on the package.
These must be complied with accordingly.
Please note the following storage conditions:
n Do not store outdoors.
n Store in a dry and dust-free place.
n Do not expose to aggressive media.
n Protect from sunlight.
n Avoid mechanical vibrations.
n Storage temperature: +5 to 40°C.
n Relative humidity: max. 80%.
n For storage periods of more than 3 months, check the general condition of all parts
and packaging regularly. If necessary, refresh or renew the preservative.
1.9 Identification of the installation - Nameplates
All information for the identification of the installation or the information on the
nameplate of the installation and all components are located in the chapter
"Technical Data ".
Important for inquiries is the correct specification of the designation and the
type. This is the only way of ensuring that we can answer your query correctly
and quickly.
The pump is equipped with a nameplate which provides the pump-specific data for
identification.
The nameplate is located on the pump and is indicated in
Ä
Chapter 8.2 ‘Equipment marking / Type plate’ on page 39.
General remarks
9 Rev. 5-06.2018
To Next Page
Loading...
Need help?
General
