WARNING!
Protective gloves, mechanical damage
Suitable protective gloves must be worn when working in areas marked with
the symbol opposite.
Protective gloves are used to protect the hands against friction, abrasions, cuts
or deeper injuries as well as when touching hot surfaces.
WARNING!
Safety shoes
Suitable safety shoes must be worn when working in areas marked with the
symbol opposite. Safety shoes protect feet against crushing, falling parts,
sliding on slippery surfaces and against aggressive chemicals.
2.7.2 General information on hazards
DANGER!
Electrical dangers
Electrical hazards are marked by the symbol opposite. Work in these areas
may only be carried out by trained personnel with the appropriate
authorisation.
Risk due to electrical energy
DANGER!
Risk of fatal injury from electric current!
Contact with live parts represents immediate danger to life due to electrocution.
Damage to the insulation or individual components can be life-threatening.
– Before starting work, create a de-energised state and ensure this state for
the duration of the work.
– Work on electrical components may only be carried out by professional
electricians.
– Turn off immediately and organise repairs if there is any damage to the
insulation voltage supply.
– Never bridge or decommission fuses.
– When replacing fuses, observe the correct rating.
– Keep voltage-carrying parts away from moisture, as this can cause a short
circuit.
Risk of fire
DANGER!
Risk of fire
If there is a risk of fire, it is imperative to use the designated extinguishing
agent and to implement suitable safety measures to tackle the fire.
It is also imperative here to comply with the safety data sheet for the chemicals
you use to tackle the fire!
Safety
15 Rev. 5-06.2018
To Next Page
Loading...
Need help?
General
