2.3 Lifetime
In relation to the dependence of the adequate maintenance protocols the life time
is 2 years (visual and functional testing, replacement of wearing parts, etc.)
Afterwards a revision is necessary, in some cases also a subsequent general overhaul
by the manufacturer.
2.4 Safety measures taken by the operator
It is expressly up to the owner to train, monitor and instruct his operating and maintenance
personnel so that they comply with all of the necessary safety measures.
The frequency of inspections and controls must be complied with and documented.
2.5 Workforce requirements
Qualifications
DANGER!
Risk of injury if personnel are inadequately qualified!
If inadequately qualified personnel work on the system or are in the hazardous
area, hazards may arise that can cause serious injuries and significant material
damage.
– All work must be carried out by qualified personnel only!
– Keep unqualified personnel away from hazard areas.
NOTICE!
Only those individuals who can be expected to perform their work reliably are
authorised as personnel. Individuals whose reactions are impaired, e.g. by
drugs, alcohol, medicines, are not authorised. When selecting personnel,
the valid age and occupation-specific regulations must be observed.
Mechanic
The mechanic is trained for the particular range of tasks in which he operates and knows
the relevant standards and regulations.
The mechanic can perform work on pneumatic and hydraulic systems because of his/her
specialized training and experience and can independently recognise and avoid potential
dangers.
Qualified electrician
Qualified electricians are able to carry out the work on electrical systems because of their
technical training, knowledge and experience, as well as awareness of the relevant
standards and regulations; qualified electricians are capable of independently identifying
and preventing potential risks. Qualified electricians are specially trained for the type of
work they do and are familiar with the relevant standards and regulations.
Servicing personnel
Certain works may only be performed by servicing personnel from the manufacturer or
those authorised by the manufacturer or servicing personnel that are specially trained for
this Other people or personnel are not authorised to carry out this work.
To carry out the work required, please contact our customer service.
Safety
13 Rev. 5-06.2018
To Next Page
Loading...
Need help?
General
