31
Using BIOS
Press <Esc> to return to the main menu setting page.
Resume By PS2 KB (S3) (Disabled)
This item enables or disables you to allow keyboard activity to awaken the system
from power saving mode.
Resume By PS2 MS (S3) (Disabled)
This item enables or disables you to allow mouse activity to awaken the system from
power saving mode.
Resume on RTC Alarm (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume at a fixed time based on the system’s RTC (realtime
clock). Use the items below this one to set the date and time of the wake-up alarm.
You must use an ATX power supply in order to use this feature.
Init Display First (PCI)
Use this item to select which graphics controller to use as the primary boot devices.
PCI/PnP Setup
This page sets up some parameters for devices installed on the PCI bus and those
utilizing the system plug and play capability.
Help Item
Init Display First PCI
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
PCI/PnP Setup
Select which graphics
contorller to use as the
primary boot device.
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Load Default SettingsF1: General Help
Press <Esc> to return to the main menu setting page.
Note: If you want this item work, please follow the steps below:
A. Insert ECS drivers DVD to run Auto setup or browse the DVD to install Intel chipset
drivers, VGA and sound drivers.
B. Install display card drivers.
C. Start computer to Windows interface, you can find Dual Monitor Support.
To Next Page
Loading...
Need help?
General
