Standby Time: About 1500 hours
Rated Power Input: DC 5.0V=1A
Frequency Range: 20Hz-20KHz
Sensitivity (5P1): 96dB
Nominal Impedance: 24ohm
What’s in the Box
Operating Instraction
Diagram
1. Press: volume Increase /press and hold: next track
2. Multl-functIon key
3. Press: volume decrease/press and hold: previous track
4. micro USB charging port
5. 3.5mm audio Jack
II. Charge Batteries
The headset is equipped with a built-In rechargeable battery. Fully charge the battery before first use. While in use, the headset will beep and flash red light to
Indicate battery low. You shall recharge the device.
1. Attach the USB charge cable to a standard USB power adapter.
2. Attach the charge cable to the Micro USB charge port on the headset.
3. Charge time: approximately 4 hours for a full charge.
Warning: The rechargeable batteries that provide power for this product must be disposed of properly for recycling. Do not dispose of batteries In fire to
preventing an explosion.
To Next Page
Loading...
Need help?
General
