Using the Headset
I. ON/OFF
Function Operation indicator
ON Long press the multifunction key for 3 seconds The blue light flashes quickly
OFF Long press the multifunction key for 3 seconds Indicator off
II. Connection
1. Bluetooth connection Please complete the connection with your mobile before use. Follow the steps below:
1.1. The distance between your mobile and the headset should be kept within 1 m. The closer the better.
1.2. Switch on the headset. Press and hold the multifunction key for 5 seconds to enter pairing mode.
1.3. Enable your mobile’s Bluetooth and search for Bluetooth devices. Select ‘EDIFIER W83OBT’ to pair. Once successfully paired, LED flashes blue slowly and
you hear a prompt beep.
Note:
1. While in pairing state, If a connection cannot be established within 3 minutes, it will automatically exit the pairing mode;
2. If prompted for a passkey, enter ‘0000’;
3. Once successfully paired, the headset and your mobile will remember each other. When the headset is turned on again, It will connect to the last connected
device automatically.
2. NFC connection
If your Bluetooth mobile supports NFC (Near Field Communication). enable your mobile’s NFC function first and switch on the headset. Then touch the NFC area of
W83OBT with the NFC area of your mobile to pair your devices.
Note:
• When the mobile hibernates or is screen-locked, It cannot pair with NFC.
• The first time you try to pair, it requires keeping your mobile In touch with W830BT for slightly longer time. Walt till W83OBT entering the pairing mode before you
take away the mobile.
• If no device is connected, you may use NFC to establish pairing; if a device is already connected, NFC function can also be used to disconnect.
3. Pair another device
The headset can simultaneously connect two Bluetooth devices. Follow the steps below:
3.1. Pair your headset with Device 1.
3.2. Switch off the headset. Long press the multi-function key to restart the headset and enter pairing mode. Conned device 2.
3.3. Now operate on device 1. Tap the headset In Bluetooth connection settings to connect and complete pairing with two devices;
Note: When two connected mobiles have different operating systems (e.g. One on Android and the other one on 10S), certain cross-system operations may show
some delay (e.g. The song in mobile A will pause while play the song In mobile B). This Is considered normal.
Ill. Making Calls
1. Basic operations
To Next Page
Loading...
Need help?
General
