EDIFIER W830BT User Guide

Function Headset status Operation
Answer a call Incoming ring Short press the multi-function key
Reject a call Incoming ring Long press the multi-function key for approx 2 seconds
End a call Talking Short press the multi-function key
Increase volume Talking Tap the volume + key
Decrease solume Talking Tap the volume – key
Direct a call to the mobile Talking Long press the multi-function key for approx 2 seconds
Direct a call to the headphone Talking Long press the multi-function key for approx. 2 seconds
Mute the mic Talking Long press the volume – key for approx. 2 seconds
Unmute Talkin (with mic uted) Long press the volume + key for approx 2 seconds
Call back last call Device connected Long press the multifunction key for approx. 2 seconds
Enable voice assistant Device connected Double press the multi-function key.
2. Three-way Calling
Function Headset status Operation
Answer new call and end the current call Second Incoming call Tap the multi-function key once
Answer new call and keep the current call on hold Second incoming call Tap the multi-function key twice
Switch between calls Talkington hold) Double-tap the multi-function key
End current call Talklng(on hold) Tap the multi-function key once
3. Calls with Two Mobiles Connected
Function Headset status Operation
End call with mobile 1 and answer a call from
mobile 2
Talking with mobile 1 while 2nd mobile calling Tap the multi-function key once
Put the call from mobile 1 on hold and answer the
call from mobile 2
Talking with mobile 1 while 2nd mobile calling Tap the multi-function key twice
Switch calls Talking with one while the other call Is on hold Double-tap the multifunction key
End the current call and switch back to the mobile
on hold
Talking with one call while the other call Is on hold Tap the multifunction key once
IV. Play Music
1. Bluetooth audio mode
When the headset is connected to a mobile that supports Qualcomm® aptXTM, you may enjoy WWI music via the headphones:
Function Headset status Operation
Increase volume Play music Tap + key
Decrease volume Play music Tap + key
Last song Play music Long press – key
Next song Play music Long press – key
Pause play Play music Tap the multi-function key once
Resume play Pause play Tap the multi-function key once
Note: • When the headset is turned up to Its maximum volume, you will hear a prompt tone from the headset.
2. AUX-IN audio mode
The headset supports AUX IN audio input. Using 3.5mm to 3.5mm audio cable to connect the headset to a music player and enjoy the music online.
Note: • Plugging in a 3.5mm audio cable will turn off the headset and automatically disconnect the connection with the Bluetooth. AUX IN audio input is now in
effect.
• If you want to go back to Bluetooth, unplug the 3.5mm audio cable and restart the headset to pair.

EDIFIER W830BT Specifications

General

Brand	EDIFIER
Model	W830BT
Category	Headphone
Language	English