To Next Page

To Previous Page

Printer Operations

Document ID: OMM-00174 Rev. D Pro 30f Operations Guide 49

This chapter describes EFI Pro 30f Wide Format Printer sleep and shutdown procedures for the overnight, short term (1 -

3 days), and long term (4+ days).

6.4.1 Overnight Sleep Mode

EFI recommends that sleep mode be used for overnight shutdown. Set the printer into sleep mode as follows:

1. Shuttle the carriage twice so that it sits over the table.

2. Clean the bulk of the ink in the drip pan with a lint free

wipe.

3. Use a lint free wipe with flush to finish cleaning the

tray and wiper.

4. Return the carriage to the home position.

5. Raise the carriage.

6. Wipe each head with a clean, lint free wipe.

7. Wipe the jet plate.

8. Lower the carriage.

9. Put the printer in sleep mode.

6.4 Shutting Down Printer

Figure 6-5 Test Settings Window

Questions and Answers:

Need help?

Do you have a question about the EFI Pro 30f and is the answer not in the manual?

EFI Pro 30f Specifications

General