EFI VUTEk 3r Series User Manual

Semi-Annually
Document ID: OMM-00144-L VUTEk 3r & 5r Series Maintenance Guide 62
The following maintenance tasks must be performed every 6 months.
PPE Items: GLOVES NITRILE DISPOSABLE BOX LARGE
SAFETY GLASSES
Required Items: ABSORBENT PADS
NEW INK FILTERS
INK LINE CAP
How-to Video:
Directions:
NOTE: As part of regular maintenance, all the Primary Ink Filters should be replaced regularly.
1. Power OFF the printer.
2. Open the ink cabinet doors and place absorbent mats in the area underneath the ink filters.
3. Begin at one side of the ink cabinet and replace one filter/channel at a time. Do not attempt to replace all channels at once.
9.0 Semi-Annual Maintenance
9.1 Replace primary ink filters.
CLICK TO PLAY
Figure 9-1 Ink cabinet and absorbent pad

EFI VUTEk 3r Series Specifications

General

Brand	EFI
Model	VUTEk 3r Series
Category	Printer
Language	English