Eizo FlexScan EV2430 User Manual

11
Chapter 1 Introduction
●
Functions
The following table shows the Setting menu and setting items of each menu.
Main menu Setting Reference
Color
*1
Brightness “2-3. Adjusting Color” (page 14)
Contrast
Temperature
Gamma
Advanced Settings Saturation
Hue
Gain
Color Reset “To reset the color adjustments” (page 26)
Screen Screen Size “Screen Size Changing” (page 22)
Smoothing “2-4. Screen Adjustment” (page 19)
Analog Adjustment
*2
Auto Screen Adjust
Auto Range Adjust
Clock
Phase
Hor.Position
Ver.Position
Sound Source “3-2. Selecting sound source while using
the DisplayPort signal input” (page 23)
Power Save “Audio Output” (page 28)
PowerManager Power Save “4-1. Setting Power Saving” (page 27)
Eco Timer “4-6. Enabling / Disabling Auto Power-
OFF” (page 31)
Monitor Settings Input Signal “To set input signal selection” (page 43)
Power Indicator “4-2. Setting Power Indicator” (page 28)
Language “3-8. Setting Language” (page 25)
DDC/CI “3-3. Enabling / Disabling DDC/CI
communication” (page 23)
Border Intensity “To adjust brightness of non-display area”
(page 22)
Menu Settings Orientation “3-5. Setting Orientation” (page 24)
Logo “3-6. Showing and hiding the EIZO logo”
(page 24)
Menu Position “3-7. Changing Setting Menu Display
Position” (page 25)
Reset “To reset all adjustments to the default
settings” (page 26)
Information “6-6. Displaying Monitor Information”
(page 44)
*1 The adjustment / settings available on the “Color” menu depend on the selected Color mode (see “Adjustable
settings in each mode” (page 15)).
*2 These functions can be adjusted with analog input.

Eizo FlexScan EV2430 Specifications

General

Energy efficiency scale	A to G