EasyManuals Logo
Home>Eizo>Monitor>FlexScan EV2750

Eizo FlexScan EV2750 User Manual

Eizo FlexScan EV2750
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
- 36 -
Chapter 5
Troubleshooting
5-2. Imaging problems
Problem Possible cause and remedy
1. The screen is too bright or too dark. Adjust the “Brightness” or “Contrast” in the Setting menu (see “Color Adjustment” (page 21)). (The LCD monitor
backlight has a limited life span. When the screen becomes dark or begins to icker, contact your local EIZO
representative.)
If the screen is too bright, try changing the Auto EcoView setting to “On”. The monitor detects the ambient brightness to
adjust the screen brightness automatically (see Auto EcoView” (page 17)).
2. “Brightness” cannot be adjusted When Auto EcoView is set to “On”, “Brightness” may not be adjustable due to the advanced settings of Auto EcoView.
Cannot increase/decrease setting value (
or “
” is displayed in gray)
- Brightness” adjustment menu via
operation switch
/
- Brightness” adjustment menu in color
adjustment
/
The bright adjustment range of the Auto EcoView function can be limited to ensure that the screen is neither too bright
nor too dark. When the adjustment range is limited, values outside the range cannot be set. If you want to set a value
outside the range, try changing the following settings.
- Change the maximum and minimum values for “Brightness” in the Auto EcoView advanced settings.
- Set Auto EcoView to “Off.
For details on Auto EcoView settings, see “Auto EcoView” (page 17).
Cannot increase/decrease setting value (
and “
” are displayed in gray)
- Brightness” adjustment menu via
operation switch
- Brightness” adjustment menu in color
adjustment
Brightness adjustment may not be possible when the installation environment of the monitor is excessively bright or
dark. In this case, try changing the following settings.
- Change the maximum and minimum values for “Ambient Light” in the Auto EcoView advanced settings.
- Set Auto EcoView to “Off.
For details on Auto EcoView settings, see “Auto EcoView” (page 17).
3. Text is blurred Check whether the PC is congured to meet the resolution and vertical scan frequency requirements of the monitor (see
“1-3. Supported Resolutions” (page 11)).
When an image is displayed with a resolution other than recommended, text or lines in the displayed image may blur.
Try adjusting “Smart Resolution” on the Setting menu (see “Smart Resolution” (page 24)).
4. Afterimages appear Afterimages are particular to LCD monitors. Avoid displaying the same image for a long time.
Use the screen saver or power saving function to avoid displaying the same image for extended periods of time.

Other manuals for Eizo FlexScan EV2750

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Eizo FlexScan EV2750 and is the answer not in the manual?

Eizo FlexScan EV2750 Specifications

General IconGeneral
3DNo
DDC/CIYes
Pixel pitch0.233 x 0.233 mm
Aspect ratio16:9
Screen shapeFlat
Display surfaceMatt
Display diagonal27 \
Display technologyLED
Viewable size, vertical335.7 mm
Contrast ratio (typical)1000:1
Display number of colors16.78 million colors
Viewable size, horizontal596.7 mm
Digital vertical frequency59 - 61 Hz
Digital horizontal frequency31 - 89 kHz
Display brightness (typical)350 cd/m²
Supported graphics resolutions1920 x 1080 (HD 1080), 2560 x 1440
USB hub version3.2 Gen 1 (3.1 Gen 1)
DVI-D ports quantity1
Headphone connectivity3.5 mm
VGA (D-Sub) ports quantity0
USB Type-A downstream ports quantity2
RMS rated power2 W
CertificationTCO Displays 7, TUV/E, TUV/GS, RCM, CE, CB, cTUVus, FCC-B, TUV/S, VCCI-B, RoHS, WEEE, CCC, EAC
Product colorWhite
Market positioning-
Pivot angle0 - 90 °
Tilt angle range-5 - 35 °
Number of OSD languages11
Panel mounting interface100 x 100 mm
On Screen Display (OSD) languagesCHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, SWE
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)67 W
Annual energy consumption39 kWh
Power consumption (standby)0.5 W
Power consumption (typical)22 W
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Sustainability certificatesEPEAT Gold, ENERGY STAR
Cables includedAC, DisplayPort, USB
Bundled softwareEIZO ScreenManager Pro EIZO ScreenSlicer
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)245 mm
Height (with stand)545.2 mm
Weight (with stand)7900 g
Depth (without stand)48.5 mm
Width (without stand)611.6 mm
Height (without stand)359 mm
Weight (without stand)5100 g

Related product manuals