4-2. Functions of the “Administrator Settings” Menu
Function Setting Value Description
Auto Input Detection On
O
This function automatically recognizes the connector through
which PC signals are input, and displays images on the
screen accordingly.
• “On”
When the monitor is connected to multiple PCs, if a
specic PC enters power saving mode or no signals
are input to the monitor, the connector is automatically
changed to another one to which signals are input.
• “O”
To be set to this when manually selecting input signals. In
this case, you can select the input signal to display using
the
operation switch on the front of the monitor. For
details, see “2-2. Switching Input Signals” (page 13).
Note
• This function is not available during PbyP display.
• This product automatically recognizes the connector
through which PC signals are input, and displays images
on the screen accordingly regardless of whether this
function is set to On or O just after the main power
switch on the rear side of the monitor has been turned
on.
• When this function is set to “On”, the monitor only enters
the power saving mode when signals are not input from
any PC.
Compatibility Mode On
O
If you want to avoid the following phenomena, set this function
to "On".
• The positions of windows and icons are shifted when the
monitor is turned o / on or has returned from the power
saving mode.
• Power Save function of the PC does not work normally.
• When the power to the monitor is turned o, a device
connected to the USB downstream port does not work, or
power is not supplied to the connected device.
On-Screen Logo On
O
When the monitor is turned on, the EIZO logo appears on the
screen.
When this function is set to “O”, the EIZO logo does not
appear.
26
Chapter 4 Administrator Settings
To Next Page
Loading...
Need help?
General
