10
CLEANING THE CASE
Only use tepid water and a mild detergent on a soft cloth.
Do not use bleach or abrasives.
Do not splash water directly onto the main unit.
Avoid wetting the power connection port, doing so may cause an electric shock
and can lead to the insulation deteriorating or unit to rust.
CLEANING THE FILTERS AND FILTER HOLDING AREA
Hoover the filter gently every 2-3 weeks or more often if used in dusty
environments.
Ensure the filter is not damaged during the cleaning process and replace if it
shows signs of damage.
Wipe the filter holding area with a dry cloth if necessary.
CLEANING THE FILTER COVER AND CLEAN AIR OUTLET
Use water and a mild detergent.
Do not use bleach or abrasives.
Do not spray water inside the unit.
If the clean air outlet grilles get soiled easily, use a vacuum attachment or soft
brush to clean.
If the filter cover is dirty, hoover it. If it is heavily soiled, wash it with warm soapy
water and dry thoroughly before reinserting it in the unit.
NOTE: Do no assemble the unit and power it on before all the parts are completely
dry. Any other maintenance than what is described in this user manual must be only
performed by the service centre.
TECHNICAL SPECIFICATION
To Next Page
Loading...
Need help?
General