9
Installation Instructions
raise
lower
Leveling your washer
Excessive noise and vibration can be prevented by
properly leveling the washer.
For free standing installation and with the 1.
washer within 4 feet (1 m) of its final location,
place a level on top of the washer.
Use the universal wrench to adjust the level-2.
ing legs so the washer is level front-to-rear and
side-to-side, and stable corner-to-corner.
Press down on alternate corners and sides and 3.
feel for the slightest movement. Adjust the
appropriate leg(s) so the washer sits solidly on
theooronALLfourlegs.Keepthelevelingleg
extension at a minimum for best performance
of the washer.
NOTE
For pedestal installations, see additional
installation instructions included with the pedestal.
To Next Page
Loading...
Need help?
General
