Electrolux Range User Manual

- 26 -
TSE-N 01.01 A. B. 599 50 93 79 EN
6.3 Measures to prevent wrong electrical connection
If a range with pyrolytic self-cleaning system is connected wrongly, the micro processor at the Pris-
ma basic power board recognises this error. It changes over into the fault mode. The error is
reported by the error code display F7 in the display of the oven respectively E7 in the display of the
hot plates.The heaters are dead. The connection error can be corrected. Then the range can be
operated quite normally.
6.4 Thermal link
A thermal link is provided in all appliances at the left side at the air duct, which switches off the
device in case of overheating.
Fig. Versions of connection
Fig. Thermal link (Klixon)

Electrolux Range Specifications

General

Brand	Electrolux
Model	Range
Category	Cookers
Language	English