7 Product certifications
7.1 Emerson Wireless 1410S1 Gateway
Rev: 1.0
7.1.1 European Directive Information
A copy of the EU Declaration of Conformity can be found at the end of the
Quick Start Guide. The most recent revision of the EU Declaration of
Conformity can be found at Emerson.com.
7.1.2 Ordinary location certification
As standard, the transmitter has been examined and tested to determine
that the design meets the basic electrical, mechanical, and fire protection
requirements by a nationally recognized test laboratory (NRTL) as accredited
by the Federal Occupational Safety and Health Administration (OSHA).
7.1.3 Installing equipment in North America
The US National Electrical Code
®
(NEC) and the Canadian Electrical Code
(CEC) permit the use of Division marked equipment in Zones and Zone
marked equipment in Divisions. The markings must be suitable for the area
classification, gas, and temperature class. This information is clearly defined
in the respective codes.
7.1.4 USA
N5 U.S.A. Division 2 with Intrinsically Safe Outputs
Certificate
80009647 (CSA)
Standards
UL 60079-0: 2019, UL 60079-7: 2017, UL
60079-11: 2014, FM 3600: 2011, FM 3610:2018,
FM 3611:2004, FM 3616:2011, UL 61010-1-12 Ed
3
Markings with
Intrinsically Safe into
Division 1 or Zone 0
Class I Division 2, Groups A, B, C, D; Intrinsically
Safe outputs to Class I, Division 1, Groups A, B, C,
D; Class I, Zone 2 AEx ec [ia Ga] IIC T4 Gc
Markings with
Intrinsically Safe into
Division 2 or Zone 2
Class I Division 2, Groups A, B, C, D; Intrinsically
Safe outputs to Class I, Division 2, Groups A, B, C,
D; Class I, Zone 2 AEx ec [ic] IIC T4 Gc
Temperature code
T4 (-40 °C ≤ T
a
≤ 70 °C)
Special Conditions for Safe Use(X)
1. Warning: Potential electrostatic charging hazard - See instructions.
July 2022 Quick Start Guide
Quick Start Guide 29
To Next Page
Loading...
Need help?
General
