7.2 Emerson Wireless 1410S2 Gateway
Rev: 3.0
7.2.1 European Directive Information
A copy of the EU Declaration of Conformity can be found at the end of the
Quick Start Guide. The most recent revision of the EU Declaration of
Conformity can be found at Emerson.com.
7.2.2 Ordinary location certification
As standard, the transmitter has been examined and tested to determine
that the design meets the basic electrical, mechanical, and fire protection
requirements by a nationally recognized test laboratory (NRTL) as accredited
by the Federal Occupational Safety and Health Administration (OSHA).
7.2.3 Installing equipment in North America
The US National Electrical Code
®
(NEC) and the Canadian Electrical Code
(CEC) permit the use of Division marked equipment in Zones and Zone
marked equipment in Divisions. The markings must be suitable for the area
classification, gas, and temperature class. This information is clearly defined
in the respective codes.
7.2.4 USA
N5 U.S.A. Division 2 with Intrinsically Safe Outputs
Certificate
80009647 (CSA)
Standards
UL 60079-0: 2019, UL 60079-7: 2017, UL 60079-11:
2014, UL 60079-31: 2015, FM 3600: 2011, FM
3610:2018, FM 3611:2004, FM 3616:2011, UL
61010-1-12 Ed 3
Markings with
Intrinsically Safe
Outputs into
Division 1 or Zone 0
Class I, II, III, Division 2, Groups A, B, C, D, F, G;
Intrinsically Safe outputs to Class I, Division 1,
Groups A, B, C, D; Class I, Zone 2 AEx ec [ia Ga] IIC
T4 Gc; Class I, Class II, Zone 22 AEx tc [ia Ga] IIIC T90
Dc
Markings with
Intrinsically Safe
into Division 2 or
Zone 2
Class I, II, III, Division 2, Groups A, B, C, D, F, G;
Intrinsically Safe outputs to Class I, Division 2,
Groups A, B, C, D; Class I, Zone 2 AEx ec [ic] IIC T4
Gc; Class II, Zone 22 AEx tc [ic Gc] IIIC T90 Dc
Temperature Code
Rev 1 (-40 °C ≤ T
a
≤ 65 °C ), Rev 2 T4 (-40 °C ≤ T
a
≤ 70
°C)
July 2022 Quick Start Guide
Quick Start Guide 31
To Next Page
Loading...
Need help?
General
