Emerson Control Techniques EN Series User Manual

149
Diagnostics and Troubleshooting
High DC Bus Reset Button or Input Line Yes
Low DC Bus Reset Button or Input Line Yes
Encoder State Cycle Power Yes
Encoder Hardware Cycle Power Yes
Motor Overtemp
Allow Motor to cool down,
Reset Button or Input Line
Yes
RMS Shunt Power
(EN drives only)
Reset Button or Input Line Yes
Overspeed Reset Button or Input Line Yes
Following Error
(Pulse mode only)
Reset Button or Input Line Yes
Travel Limit +/- Auto No
All "On"
Normally "On" for one
second during power-up
Yes
Display Fault Action to Reset Bridge Disabled
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Emerson Control Techniques EN Series Specifications

General

Brand	Emerson
Model	Control Techniques EN Series
Category	DC Drives
Language	English