65
Setting Up Parameters
I/O Status Tab
This tab displays the status of the input and output functions in real time and is only available
when you are online with a drive. This tab is divided into two windows, the "Inputs" window
and the "Outputs" window.
Figure 42: I/O Status Tab
Inputs Group
Inputs Lines Window
This feature shows the various input lines and whether they are active. The line is active if the
circle next to the line is green or lit-up.
Active State
The active state is shown for each input line.
Forced
The forced state is shown for each input line.
Forced On and Forced Off
You can force an input line to a level by using the "Forced On" and "Forced Off" check boxes.
When you force an input line “On” or “Off”, all the functions assigned to that line will be
affected.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General