39
Setting Up Parameters
EZ Setup/Detailed Setup Tab
This is the default tab that is displayed each time you open a Configuration Window.
Figure 21: Default Offline EZ Setup Tab
Identification Group
Name
Enter a 24 character alpha-numeric name for the drive you are currently setting up. Assigning
a unique name for each drive in your system allows you to quickly identify a drive when
downloading, editing and troubleshooting. All keyboard characters are valid.
Target Drive Address(es)
Enter the “Target Drive Address(es)” you wish to download the setup information to (or
upload from).
To download to more than one drive simultaneously, separate the device addresses with
commas, spaces or hyphens. Commas and spaces separate individual addresses. Hyphens
indicate to include all address, between the indicated addresses, (i.e., 1, 3, 7) means download
to addresses 1 and 3 and 7 only. (1 - 7) indicates, download to addresses 1, 2, 3, 4, 5, 6, 7. If
you download to more than one device simultaneously, they must all be the same drive and
any FM modules attached to EN drives must all be of the same model and firmware revision.
Epsilon Eb and EN Drives Reference Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General