81
Installation
Figure 52: AC Filter and Cable Connections for EN Drives
Figure 53: AC Filter and Cable Connections for Epsilon Drives
NEMA Enclosure
This wail must have good
continuity to enclosure ground.
Through wall shield grommets
External Encoder
CMDS or CMMS Cable
CFOS
Cable
CFOS
Cable
CMDS or CMMS Cable
CFCO Cable
Customer supplied
terminal strip
(Connect Shield Through)
The CFCS cable can
be cut and connected
through a terminal strip
instead of using a CFOS
and a CFCO cable.
Drive
Bonded to mounting plate
and enclosure wall
AC In
3-phase
filter
EMC testing was done
with surface paint
removed from the
mounting panel area
for drive contact.
Motor
Note:
Note:
EMC testing was done
without surface paint
removed from the
mountin
panel area for
drive contact.
Note:
External Encoder
CFOS Cable
Customer supplied
terminal strip
(Connect shield through)
CFCO Cable
CMDS Cable
Bonded to mounting plate
and enclosure wall
Drive
AC In
1-phase
filter
Motor
This wall must have good
continuity to enclosure ground
Through wall shield grommets
NEMA Enclosure
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General