203
Specifications
Speed Torque Curves
Continuous ratings of the MG and NT motors are based on 100°C (212°F) motor case
temperature and 25°C (77°F) ambient temperature with the motor mounted to an aluminum
mounting plate as shown in the table below
.
• Speed torque curves are based on 240 VAC drive operation.
• All specifications are ±5 percent due to motor parameter variations.
Motor Mounting Plate Size
MG-205 and 208, NT-207 and 212 6” x 6” x .25”
MG-316 through 490 and NT-320 through NT-355 10” x 10” x .375
MG-4120 12” x 16” x .5”
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General