Important
Always use a flushing medium that is compatible with the metallurgy of the meter,
internal components. Using water as a flushing medium may result in damage to the
internal components of the turbine meter.
8.4 LME remote operation
Note
LME should be remote mounted when the ambient temperature is above 60 ºC (140 ºF).
The primary output is a single or dual high resolution signal that is amplified and shaped by
an integral amplifier mounted within an explosion-proof housing. This wave pulse can be
fed directly to remote totalizing counters, digital readout devices, presets, or control
instrumentation.
NOTICE
Inspect all electrical connections to ensure compliance to electrical codes and safety
regulations.
Operation parameters User manual
March 2019 P/N 3-9008-515
82 Daniel Series 1500 Liquid Turbine Meter, NPS 3-24
To Next Page
Loading...
Need help?
General
