Emerson E2 Quick Start Guide

Document Part # 026-4950 Rev 0 08-OCT-2014 Page 1 of 14
©2014 Emerson Climate Technologies Retail Solutions, Inc. This document may be photocopied for personal use.
Visit our website at http://www.emersonclimate.com/ for the latest technical documentation and updates.
This document will guide you through setting up and commissioning the M400 Control Techniques VFD
Drive in the E2 controller.
Note that Open MODBUS Description files require E2 firmware version 3.01F01 or higher.
The keypad and display gives information about the operating status of the drive and trip codes. It provides
the ability to change parameters, stopping and starting the drive, and the ability to perform a drive reset.
Figure 1 - Unidrive M400 Keypad Details
E2 Setup with M400 VFD Drive
for 527-0431
Quick Start Guide

Emerson E2 Specifications

General

Brand	Emerson
Model	E2
Category	Controller
Language	English