Emerson GO USB Logger User Manual

13
Using the Software
To install the software, visit Emerson.com/GOUSBLogger or use
the available QR code. Once downloaded, simply extract the .zip
le to a desired location and run the executable le
4
. Follow the
steps of the installer. Once the installer has nished, navigate
to the installed directory, or program shortcut to launch the
application.
4
Administrative privileges may be required to install the software. Consult your IT department for
assistance.
Connect the logger to a PC. After launching the software,
you will be asked to select a preferred language. Select
the preferred language and click Enter. The software will
now launch.
Download GO USB
Logger Software
Conguration Software
While the all the loggers come pre-congured and ready to use with default settings, the GO USB
loggers are congurable to meet your cold chain needs. If you wish to congure a logger, please
ensure that the product has been stopped and you have transferred reports to your computer. Once
the logger is recongured the previous PDF and CSV les will no longer be available.
If you wish to use the logger out of the box, the default factory programming is as follows:
• Recording interval: 5 min
• Alerts setting: Disabled
• Sound alarm: Disabled
• Memory mode: Stop when full

Emerson GO USB Logger Specifications

General

Brand	Emerson
Model	GO USB Logger
Category	Data Loggers
Language	English