Emerson GO USB Logger User Manual

3
The family of GO USB Loggers are congurable temperature and humidity devices for your
cold chain needs.
An accompanying conguration software allows users to customize the logger to meet specic
customer requirements. Data gathered and stored is easily accessible via a secure PDF le and
available to share with key stakeholders. Time stamp recordings at the end of the PDF document
create an audit trail of logger events.
Introduction
Understanding the Device
LED light
(Green = On, Red = Alert)
USB connector cover
GO USB Humidity (TH1XD)
Humidity venting hole
Start/Stop
Hang strap connector (side)
Operating Instructions (back side)
Battery compartment (back side)
Probe jack
(only for TP1XD)
LCD Display
(Navigation buttons)
Serial number
(bottom side)
Loggers come pre-congured from the
factory with the following settings:
• Alerts: None
• Recording interval: 5-minutes
• Memory mode: Stop when full
What’s in the box
• Five GO USB Loggers
• Five ER14250 (1/2 AA) Lithium batteries
• Five hang straps
• Only TP1XD model: Five dry ice probes
• Only TP1XD model: One calibration certicate

Emerson GO USB Logger Specifications

General

Brand	Emerson
Model	GO USB Logger
Category	Data Loggers
Language	English