Emerson QuickPanel+ IC755C S06RD Series User Manual

Quick Panel Operator User Manual Section 3
GFK-2847AA Jan 2023
Software 32
3.12 VNC Server
The VNC Server enables remote, visual connectivity to the QuickPanel
+
Operator Interface from a laptop computer or a mobile device through
the remote VNC Viewers. User authentication of the VNC Server in the
QuickPanel
+
is determined by the configuration of the Enhanced Security
feature on the device. If the Enhanced Security feature is enabled for the
device, a VNC Viewer can connect to the QuickPanel
+
on the VNC Server.
Connection is dependent upon user authentication with the correct
password. User password entry is validated with the Enhanced Security
password. If the Enhanced Security feature is disabled for the device, the
VNC Server does not enforce authentication of VNC Viewers.
The VNC Server is automatically launched during QuickPanel
+
startup. It
can also be launched manually from the Launch Application.
Note: Only One VNC client can connect to VNC Server on QP
+
. 5900 is the TCP/IP port on which the VNC
server will accept connections.
To manually launch the VNC Server: from the Start menu, select
Programs, System, Launch Application and start the VNC Server
application.
Figure 26: Select QP
+
VNC Server Application
Note: The VNC server starts approximately 40 seconds after the QuickPanel
+
start-up process has been
completed.

Emerson QuickPanel+ IC755C S06RD Series Specifications

General

Brand	Emerson
Model	QuickPanel+ IC755C S06RD Series
Category	Monitor
Language	English