Quick Panel Operator User Manual Section 4
GFK-2847AA Jan 2023
Pre-installation Checks 50
3.
From the Control Panel, double-tap System to configure a
Network Device Name. Many applications, including Proficy
Historian, require a unique Device Name.
NOTICE
It is recommended to set a unique Device Name for the QuickPanel+ to avoid future
conflicts.
4.
From the Control Panel, double-tap Network and Dial-up
Connections to configure network settings.
5.
Run the Backup Utility to save the settings.
4.4 Runtime Set-up
To download an application to a QuickPanel
+
Operator Interface, set up a
data link between the unit and the development workstation. Refer to
Section 5.7.2, Ethernet for IC755CxS06RDx, IC755CxW07CDx, and
IC755CxSxxCDx, and the PAC Machine Edition online help, Downloading a
Machine Edition Project.
To Next Page
Loading...
Need help?
General
