Emerson Sensi User Manual

Sensi
™
Wi-Fi Programmable Thermostat Installation Guide 7
Install New
Thermostat Base
Mount the Sensi thermostat
base on the wall using the
supplied screws. You may
need to drill holes if your
Sensi thermostat does not
align with your old thermostat.
Installing the Sensi Thermostat
9
11
10
Connect the Wires
Attach the appropriate wires
to the corresponding Sensi
thermostat wire terminals.
Make sure all wires
are screwed in tight
and secure.
Mount the thermostat using the
supplied screws, drilling holes
if necessary.
Video: How to install new thermostat base
Screws
Carrier
8:12 PM
Install Thermostat
Install new thermostat base
Video: How to connect the wires
Carrier
8:12 PM
Install Thermostat
NEW THERMOSTAT
Connect the wires
RC
RC
RH
O/B
Y
G
W/E
C
RH
Y
W/E
11
Remove Battery Tag
and Attach Cover
Remove the battery tag from
the back of the thermostat,
and the Sensi thermostat will
turn on. Make sure the wires
are pushed back into the
wall so that the face plate
can securely attach to the
thermostat base. Line up the
tabs and push the face plate
onto the base. It should attach
securely to the base.
Tip: Tuck the wires into the wall keeping them
flush so thermostat snaps in place
Push until faceplate is secure.
Carrier
8:12 PM
Install Thermostat
Remove battery tag and attach faceplate
12
Connect to Sensi
The app will now instruct you to connect to the Sensi
network. You need your Sensi Security Card for this
step. If you misplaced your Sensi Security Card, your
Sensi Password can also be found on a sticker on the
back of the thermostat face plate.

Emerson Sensi Specifications

General

Brand	Emerson
Model	Sensi
Category	Thermostat
Language	English