Enerpac E-Pulse E Series User Manual

6
2.0 PRODUCT DATA
2.1 Specifications
Pump Model
Number
Control Valve Type For Use With:
Hydraulic
Connections *
Weight **
Usable Oil
Capacity ***
Oil Type
lb kg gal l
EP3504T_ 4-Way, 2-Position Torque Wrench
Enerpac Spin-On hydraulic
couplers (1 male, 1 female)
44.9 20.4
0.8 3.0
Enerpac
HF
EP3504T_-M 4-Way, 2-Position Torque Wrench
Enerpac Spin-On hydraulic
couplers (2 male, 2 female)
47.9 21.7 0.8 3.0
Enerpac
HF
* Enerpac Spin-On hydraulic couplers are included with pump. Pump hydraulic port thread size is 1/4" NPTF.
** Approximate weight of pump including oil.
*** Approximate usable oil capacity of pump hydraulic reservoir (excludes pump elements).
Pump total oil capacity (including reservoir and pump element housing) is approximately 1.14 gallons [4.33 liters].
Pump Model
Number
Pump
Type
Maximum Hydraulic
Working Pressure*
Flow Rate at Maximum Speed
Motor
Speed
Range
At 14.5 psi
[1 bar]
At 2538 psi
[175 bar]
At 5,075 psi
[350 bar]
At 10,000 psi
[700 bar]
psi bar in³/min l/min in³/min l/min in³/min l/min in³/min l/min RPM
EP3504T_ 2 Stage 10,000 700 220 3.61 130 2.13 58 0.95 32 0.52 600-2400
EP3504T_-M 2 Stage 10,000 700 220 3.61 130 2.13 58 0.95 32 0.52 600-2400
* Maximum pressure setting of pump is mechanically limited to approximately 10,300-10,800 psi [710-745 bar].
Pump Model
Number
Ending In:*
Input Power Motor Output
Rating
Operating Temp
Range**
Sound
Level
Lwa***
Nominal
Voltage Range
Phase Hz
Max.
Amps
Max.
kW
Plug Type
hp kW ˚ F ˚ C dB
B or B-M 100-120 VAC 1 50-60 12.0 1.12 NEMA 5-15
0.85 0.63
-22 to
+122
-30 to
+50
70-85
I or I-M 200-250 VAC 1 50-60 7.0 1.28 NEMA 6-15
0.85 0.63
-22 to
+122
-30 to
+50
70-85
E or E-M 200-250 VAC 1 50-60 7.0 1.28 Schuko CEE 7/7
0.85 0.63
-22 to
+122
-30 to
+50
70-85
* Pump models with the -M sux are equipped with multi-port manifolds.
** At 85% relative humidity.
*** Sound level will vary depending on pump speed and load.
2.2 External Dimensions
Item
Dimension
inch mm
A 10.2 259
B 14.2 361
C1* 15.8 401
C2** 16.9 429
ft m
D
(pendant
cable)
20 6.0
E
(power
cord)
2.0 0.6
* Models ending in B, I or E.
** Models ending in B-M, I-M or
E-M (equipped with multi-port
manifolds).
D
A
B
C1, C2
E

Enerpac E-Pulse E Series Specifications

General

Brand	Enerpac
Model	E-Pulse E Series
Category	Water Pump
Language	English