EM1 and EM2 Card Printer Installation and Administrator’s Guide 11
Install the Print Ribbon
Depending on the printer model, the print ribbon is available as a replaceable roll that you install
on the print ribbon cartridge, or a prefilled print ribbon cassette.
Load the Print Ribbon Cartridge
The print ribbon cartridge ships inside the printer.
1. Pull up the cover latch handle and open the printer cover.
Remove the print ribbon cartridge.
2. Load the print ribbon.
a. Load a full roll of print ribbon (the
purple spool) onto the purple spindle
closest to the cartridge handle until it
clicks into place.
b. Place the silver take-up spool on the
silver take-up spindle until it clicks into
place.
c. Wind the take-up spool
counterclockwise one full turn.
3. Load the cleaning roller on the ribbon cartridge.
4. Remove the protective wrapper from the cleaning roller.
Load a new cleaning roller with each new roll of print ribbon. Replace it between
ribbon changes if you notice debris on the printed cards, or if the cleaning roller is
no longer sticky.
Protective
Wrapper
To Next Page
Loading...
Need help?
General
