MEV Spider
01423 859 395
SHOULD YOU ENCOUNTER ANY PROBLEMS
INSTALLING THIS UNIT, CALL US ON:
17
Maintenance
• There is no requirement for maintenance other than cleaning during the
five-year warranty period.
• Before cleaning, isolate the unit from the mains supply then undo the
four screws and remove the lid (as in installation step 13).
• Now undo the motor plate screws and lift the motor plate assembly
backwards then out of the unit. The power cable will remain attached
between the two sections.
• Remove any dust and debris from the inside of the unit then replace the
motor plate and four screws and the lid and four screws.
• Dust and debris should also be removed periodically from any extract
valve filters that are fitted to ensure they do not become blocked.
To Next Page
Loading...
Need help?
General
