Envirovent MEV SPIDER User Manual

MEV Spider
01423 859 395
SHOULD YOU ENCOUNTER ANY PROBLEMS
INSTALLING THIS UNIT, CALL US ON:
7
Installation
1. Hold the unit up to the chosen location (wall, floor or ceiling) and
ensure there is space for ducts and maintenance access.
2. Use the unit as a guide to mark the 4 fixing holes. Then remove
the unit and drill the fixings holes and insert a plasterboard plug into
each hole.
3. Insert a rubber sleeve into each of the four fixing points at the
corners of the unit. Then stick an adhesive foam pad above and
below each hole.
4. Use an 8g x 2.0” screw and a steel washer to attach each of the
four fixing points to the mounting surface. Do not over tighten the
fixing assembly.
1 2
3 4
CEILING
FLOOR
WALL

Envirovent MEV SPIDER Specifications

General

Brand	Envirovent
Model	MEV SPIDER
Category	Fan
Language	English