Safety and operating instructions
50 © Construction Tools GmbH | 33905146 01 | 2019-09-05
Original Instructions
7.4.7 Chisel paste filling device
Construction Tools GmbH offers a device for refilling
empty cartridges. This can be mounted on a 15-kg or 45-
kg hobbock to fill empty cartridges as required.
Bio chisel paste
550-g Bio chisel paste cartridges packed per 12 car-
tridges:
part number 3363 1223 56 for ContiLube
®
II
15-kg Bio chisel paste container,
part number 3363 1223 57
45-kg Bio chisel paste container,
part number 3363 1223 58
Chisel paste
500-g chisel paste cartridges packed per 12 cartridges:
part number 3363 0912 00 for ContiLube
®
II
15-kg chisel paste container,
part number 3362 2639 00
45-kg chisel paste container,
part number 3362 2632 75
Manual grease gun for ContiLube
®
II cartridges:
part number 3363 0345 67
Filling device for use with 15-kg containers:
part number 3363 0946 69
Filling device for use with 45-kg containers:
part number 3363 0664 11
For further information, please contact the Epiroc Cus-
tomer Center / Dealer in your area.
7.5 Checking the tensioning bolts
WARNING Rupturing washers become projectiles
Washers can rupture and cause serious injuries, if you
hit the heads of the tensioning bolts or the washers.
u Never check the tensioning bolts by acoustic test.
n
Check the tensioning bolts monthly for tight fit.
n
Dismount the adapter plate and the elastic pad (see
chapter Removing the adapter plate).
n
Tighten the loose tensioning bolt with the torque re-
quired. (see chapter Bolt connections / Tightening
torques).
n
Have broken tensioning bolts immediately replaced.
n
If you have any questions about replacement of bro-
ken tensioning bolts, consult the Epiroc Customer
Center / Dealer in your area.
To Next Page
Loading...
Need help?
General
