Making Detailed Adjustments 33
Making Detailed Adjustments
You can use the projector’s on-screen menus to make detailed adjustments to the image
quality—such as the brightness, contrast, sharpness, and color. You can also change the menu
display, sleep mode settings, and other projector features.
Using the Menu System
You can access the menu system either from the remote control or the buttons on the
projector’s control panel. You can access the full menu or a line menu that lets you adjust the
Picture and Memory settings while viewing their effects on your display. You can also change
the menu language and control how the menus display (see page 34).
1. To display the full menu, press the
Menu button on the projector or remote control. You
see a display like this one (the actual display depends on the connected equipment):
Note: If no equipment is connected to the projector, some options may not be available.
2. Press the u or d button to highlight an option, then press the Select button to select
it.
3. Press the u, d, l, or r button to change settings as necessary. You may have to press the
Select button to confirm your choice.
4. When you’re finished, press the
Esc button to return to the previous menu or press the
Menu button to exit the menu system.
Main menu
options
Settings available
for the highlighted
menu
PowerLite Cinema 400.book Page 33 Friday, July 7, 2006 2:24 PM
To Next Page
Loading...
Need help?
General