Specifications 63
Compatible Video Formats
The projector supports analog video in NTSC, PAL, and SECAM formats, and it automatically adjusts
to the incoming signal. It can receive these formats as composite video, S-video, or component video—
which it accepts through the Video, S-Video, and Input A ports, respectively.
The projector also supports digital video (SDTV, HDTV) and various monitor display formats. Digital
video is accepted by the HDMI port and the Input A port (in component video format). The Input B
port accepts analog RGB computer monitor signals.
If necessary, you can select a different Aspect setting to optimize the image. The resolution at which the
image displays for a given setting depends on the currently active picture source, as listed in the
following tables.
Composite video or S-Video
Component video
Note: The signal name refers to the total number of visible scan lines and the display mode
(interlaced or progressive), as defined by the signal format.
Format
Aspect setting
Normal
(4:3)
Zoom
(16:9)
Squeeze/
Wide
(16:9)
Through
(4:3)
Squeeze
Through
(16:9)
NTSC 960 × 720 1280 × 720 1280 × 720 596 × 446 794 × 446
PAL or SECAM 960 × 720 1280 × 720 1280 × 720 708 × 528 944 × 528
Format/
Signal
Aspect setting
Normal Zoom Squeeze Wide Through
Squeeze
Through
SDTV
480i
576i
480p
576p
(4:3)
960 × 720
960 × 720
960 × 720
960 × 720
(16:9)
1280 × 720
1280 × 720
1280 × 720
1280 × 720
(16:9)
1280 × 720
1280 × 720
1280 × 720
1280 × 720
(16:9)
1280 × 760
1280 × 760
1280 × 760
1280 × 760
(4:3)
596 × 446
708 × 528
596 × 446
708 × 528
(16:9)
794 × 446
944 × 528
794 × 446
944 × 528
HDTV
720p
1080i
(16:9)
1280 × 720
1280 × 720
—
—
—
—
—
—
(16:9)
1176 × 664
—
—
—
PowerLite Cinema 400.book Page 63 Friday, July 7, 2006 2:24 PM
To Next Page
Loading...
Need help?
General