88
Originals Do Not Feed From the Automatic Document Feeder
If your originals do not feed when placed in the ADF, try these solutions:
• Make sure the size, weight, and number of your originals are supported by the ADF.
• Make sure the originals are loaded correctly.
• Make sure the document is not curled or creased.
• Try cleaning the inside of the ADF.
Parent topic: Solving Original Document Feeding Problems
Related references
Original Document Specifications for the ADF
Related tasks
Cleaning the ADF
Related topics
Placing Originals on the Scanner
Originals Jam in the Automatic Document Feeder
If your originals jam in the ADF, follow the steps here to clear the jam.
1. Remove your originals from the input tray.
2. Raise the ADF cover and remove any jammed originals.