EasyManuals Logo
Home>Epson>Projector>EB-S02

Epson EB-S02 User Manual

Epson EB-S02
103 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #74 background imageLoading...
Page #74 background image
Check Remedy
Is the computer set for dual display?
(Only when projecting computer images)
If dual display is activated in the Display Properties of the computer's Control Panel, only about half of the image on the
computer screen is projected. To display the entire image on the computer screen, turn off the dual display setting.
s Computer video driver documentation
Is the correct resolution selected?
(Only when projecting computer images)
Set the computer so that the signals being output are compatible with the projector.
s "Supported Monitor Displays" p.92
s
Computer's documentation
Image colors are not right
Check Remedy
Do the input signal settings match the signals from the connected
device?
Change the following settings according to the signal for the connected equipment.
When the image is from a device connected to the Computer port
s Signal - Input Signal p.58
When the image is from a device connected to the Video or S-Video port.
s Signal - Video Signal p.58
Is the image brightness adjusted correctly? Adjust the Brightness setting from the Configuration menu.
s Image - Brightness p.57
Are the cables connected correctly? Check that all the cables required for projection are securely connected.
s "Connecting Equipment" p.22
Is the
contrast
g
adjusted correctly? Adjust the Contrast setting from the Configuration menu.
s Image - Contrast p.57
Is the color adjustment set correctly? Adjust the Color Adjustment setting from the Configuration menu.
s Image - Color Adjustment p.57
Are the color saturation and tint adjusted correctly?
(Only when projecting images from a video source)
Adjust the Color Saturation and Tint settings from the Configuration menu.
s Image - Color Saturation, Tint p.57
Problem Solving
74

Table of Contents

Other manuals for Epson EB-S02

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-S02 and is the answer not in the manual?

Epson EB-S02 Specifications

General IconGeneral
Matrix size0.55 \
Native aspect ratio4:3
Projection distance- m
Projection technology3LCD
Supported aspect ratios-
Contrast ratio (typical)3000:1
Screen size compatibility30 - 350 \
Projector native resolutionSVGA (800x600)
Keystone correction, vertical± 30 °
Projector brightness (economic mode)2080 ANSI lumens
FocusManual
Offset8:1 %
Throw ratio1.45 - 1.96:1
Digital zoom1.35 x
Focal length range- mm
Lamp typeUHE
Lamp power200 W
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)5000 h
DVI portNo
USB connector typeUSB Type-B
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity1
Ethernet LAN (RJ-45) ports0
Full HDYes
Supported video modes1080i
Supported graphics resolutions1920 x 1080 (HD 1080), 800 x 600 (SVGA)
RMS rated power1 W
PlacementDesktop
Product typeStandard throw projector
Product colorBlack
Cable lock slot typeKensington
Power sourceAC
Power consumption (standby)0.47 W
Power consumption (typical)270 W
Noise level37 dB
Country of originChina
Noise level (economic mode)29 dB
Pallet width800 mm
Pallet height2204 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet78 pc(s)
Quantity per pallet layer6 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth228 mm
Width295 mm
Height77 mm
Weight2300 g
Package depth360 mm
Package width335 mm
Package height158 mm
Package weight3320 g

Related product manuals