EasyManuals Logo
Home>Epson>Projector>EB-X12

Epson EB-X12 User Manual

Epson EB-X12
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
Attention
If an incorrect password is entered three times in succession, the message
"The projector's operation will be locked." is displayed for approximately five
minutes, and then the projector switches to standby mode. If this happens,
disconnect the power plug from the electrical outlet and then reinsert it and
turn the projector's power back on. The projector displays the password entry
screen again so that you can enter the correct password.
If you have forgotten the password, make a note of the "Request Code:
xxxxx" number that appears on the screen and contact the nearest address
provided in the Epson Projector Contact List.
s Epson Projector Contact List
If you continue to repeat the above operation and enter the wrong password
thirty times in succession, the following message is displayed and the
projector does not accept any more password entries. "The projector's
operation will be locked. Contact Epson as described in your documentation."
s Epson Projector Contact List
Restricting Operation (Control Panel Lock)
Perform one of the following to lock the operation buttons on the control
panel.
Full Lock
All of the buttons on the control panel are locked. You cannot perform
any operations from the control panel, including turning the power on or
off.
Partial Lock
All of the buttons on the control panel, except for the [
t] button, are
locked.
This is useful at events or shows when you want to deactivate all buttons
during projection or at schools when you want to limit button operation.
The projector can still be operated using the remote control.
a
Press the [Menu] button while projecting.
s "Using the Configuration Menu" p.65
Using the remote control Using the control panel
b
Select Control Panel Lock from Settings.
c
Select either Full Lock or Partial Lock according to your purpose.
Security Functions
60

Table of Contents

Other manuals for Epson EB-X12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-X12 and is the answer not in the manual?

Epson EB-X12 Specifications

General IconGeneral
Matrix size0.55 \
Projection distance- m
Projection technologyLCD
Contrast ratio (typical)3000:1
Screen size compatibility30 - 300 \
Projector native resolutionXGA (1024x768)
Aspect ratio4:3
RS-232 ports0
Dimensions (WxDxH)295 x 228 x 77 mm
Connectivity technologyWired
Maximum operating altitude2286 m
Offset8:1 %
Zoom capabilityYes
Focal length range1.58 - 20.28 mm
Lamp typeUHE
Lamp power200 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)5000 h
DVI portNo
USB connector typeUSB Type-A, USB Type-B
USB 2.0 ports quantity2
S-Video inputs quantity1
Analog signal format system-
RMS rated power2 W
Product typeStandard throw projector
Product colorBlack, White
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.47 W
Power consumption (typical)283 W
Noise level37 dB
Country of originChina
Noise level (economic mode)29 dB
Operating temperature (T-T)5 - 35 °C
Pallet width800 mm
Pallet height2204 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet78 pc(s)
Quantity per pallet layer6 pc(s)
Weight and Dimensions IconWeight and Dimensions
Weight2300 g
Package depth360 mm
Package width335 mm
Package height158 mm
Package weight3847 g

Related product manuals