EasyManuals Logo
Home>Epson>Projector>EB-X12

Epson EB-X12 User Manual

Epson EB-X12
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #89 background imageLoading...
Page #89 background image
You should clean the projector if it becomes dirty or if the quality of
projected images starts to deteriorate.
Attention
Turn off the projector's power before cleaning.
Cleaning the Projector's Surface
Clean the projector's surface by wiping it gently with a soft cloth.
If the projector is particularly dirty, moisten the cloth with water containing
a small amount of neutral detergent, and then firmly wring the cloth dry
before using it to wipe the projector's surface.
Attention
Do not use volatile substances such as wax, alcohol, or thinner to clean the
projector's surface. The quality of the case may change or become discolored.
Cleaning the Lens
Use a commercially available cloth for cleaning glasses to gently wipe the
lens.
Warning
Do not use sprays that contain flammable gas to remove dust and lint from the
lens. The projector may catch fire due to the high internal temperature of the
lamp.
Attention
Do not rub the lens with harsh materials or subject the lens to shocks, as it
can easily become damaged.
Cleaning the Air Filter
Clean the air filter and the air intake vent when the following message is
displayed.
"The projector is overheating. Make sure nothing is blocking the air vent,
and clean or replace the air filter."
Attention
If dust collects on the air filter, it can cause the internal temperature of the
projector to rise, and this can lead to problems with operation and shorten
the optical engine's service life. Clean the air filter immediately when the
message is displayed.
Do not rinse the air filter in water. Do not use detergents or solvents.
Cleaning
89

Table of Contents

Other manuals for Epson EB-X12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-X12 and is the answer not in the manual?

Epson EB-X12 Specifications

General IconGeneral
Matrix size0.55 \
Projection distance- m
Projection technologyLCD
Contrast ratio (typical)3000:1
Screen size compatibility30 - 300 \
Projector native resolutionXGA (1024x768)
Aspect ratio4:3
RS-232 ports0
Dimensions (WxDxH)295 x 228 x 77 mm
Connectivity technologyWired
Maximum operating altitude2286 m
Offset8:1 %
Zoom capabilityYes
Focal length range1.58 - 20.28 mm
Lamp typeUHE
Lamp power200 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)5000 h
DVI portNo
USB connector typeUSB Type-A, USB Type-B
USB 2.0 ports quantity2
S-Video inputs quantity1
Analog signal format system-
RMS rated power2 W
Product typeStandard throw projector
Product colorBlack, White
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.47 W
Power consumption (typical)283 W
Noise level37 dB
Country of originChina
Noise level (economic mode)29 dB
Operating temperature (T-T)5 - 35 °C
Pallet width800 mm
Pallet height2204 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet78 pc(s)
Quantity per pallet layer6 pc(s)
Weight and Dimensions IconWeight and Dimensions
Weight2300 g
Package depth360 mm
Package width335 mm
Package height158 mm
Package weight3847 g

Related product manuals