22
Advanced Color Adjustments
RGB adjustment (Offset, Gain)
Selecting the color gamut
Selecting the color gamut
The setting values for providing the color
gamut that matches the specifications for the
equipment being used have been recorded. You
can change the color gamut easily just by
selecting a setting from the menu.
This setting is only possible when "Color
Mode" is set to "Natural".
Select "HDTV", "EBU" or "SMPTE-C"
depending on the equipment being used.
Press , and then select "Image" -
"Advanced" - "Color Gamut" in that order.
Press to exit the menu.
RGB adjustment (Offset, Gain)
Press and then select
"Image" - "Advanced" - "RGB" in that
order and confirm the selection.
Use or (UP or DOWN) to
select an item, and then use or
(LEFT or RIGHT) to make the
adjustment.
To return the adjustment results to their
default settings, press .
Press to exit the menu.
The image brightness can be adjusted by adjusting
the individual R (red), G (green) and B (blue)
components of the dark areas (offset) and bright
areas (gain).
Adjustment is not possible when "Color Mode" is
set to "x.v. Color".
If you would like dark areas to appear more clearly,
change the setting to the + (right) side. If you
change it to the – (left) side, the whole image will
become sharper, but the contrast in dark areas will
become poorer.
If you would like bright areas to appear more
clearly, change the setting to the – (left) side. If
you change it to the + (right) side, you will feel
that the image is becoming brighter and closer to
white, but the contrast in light areas will become
poorer.
Offset
Gain
To Next Page
Loading...
Need help?
General
