Epson EH-TW5500 User Manual

24
Viewing Images at a Preset Image Quality(Memory Function)
After using a subset of "Signal" and "Image" in the configuration menu to adjust the projected images,
the adjusted values can then be saved (Save Memory).
In addition, the saved data can be retrieved easily, so that you can enjoy viewing images with the
adjusted settings at any time (Load Memory).
Viewing Images at a Preset Image
Quality (Save Memory)
Saving, Loading, Erasing and Renaming
Memory
Saving, Loading, Erasing and
Renaming memory
Adjust each of the settings to the values to be
saved.
Press , and select "Save Memory".
The Save Memory screen is displayed.
Select the memory name to register the
adjustments to from Memory9 to Memory10,
and press or .
Memory names with appearing beside them
cannot be selected.
When preceding the memory name is green, this
indicates that adjustments are already saved to
memory.
Select an already saved memory name, and press
or .
A confirmation message will be displayed.
If you select "Yes", the previous memory content is
erased, and the current adjustment values are saved.
Save Memory
Load saved memories.
Load Memory
Press , and select "Load
Memory".
The Load Memory screen will be displayed.
Select the target memory name.
The adjustments that can be saved to memory are
as follows.
Only two adjustments can be saved to memory.
All Items under Image Menu
Displayed for input sources other than computer
Signal
Setup Level
Block NR
Mosquito NR
HDMI Video Range
Overscan
EPSON Super White
Noise Reduction
4-4 Pull-down
Advanced
Frame Interpolation
Progressive

Epson EH-TW5500 Specifications

General

Brand	Epson
Model	EH-TW5500
Category	Projector
Language	English