38
List of Functions
“Extended” Menu
Sub-menu Function
Display This lets you make settings related to the projector’s display.
Message:
Sets whether the input source name or color mode name or a message is displayed on the screen (“ON”) or not displayed (“OFF”) at times such
as when the input source or color mode is changed or when no image signals are being input.
Background Color:
Sets the screen status when the [A/V Mute] button on the remote control is being pressed or when no image signals are being input to “Black,”
“Blue,” or “Logo.”
Startup Screen:
The startup screen (the image projected when starting the projector) is displayed when starting (ON)/ or not displayed when starting (OFF).
The setting is enabled after turning the power supply off and then back on.
User’s Logo Change the user’s logo that is displayed as a background and displayed during A/V Mute. sp.66
Projection Sets the projection position. sp.58
Front, Front / Ceiling, Rear, Rear / Ceiling
By holding down the [A/V Mute] button for about 5 seconds, you can change the projection setup.
To Next Page
Loading...
Need help?
General
