Solving Problems
Checking the Printer Status
Checking the Error Indicators on the Printer
When an error occurs, the light turns on or ashes. Details of the error are displayed on the computer screen.
: On
: Flashing slowly
: Flashing fast
Light Situation Solutions
No paper is loaded or more than one sheet
has been fed at a time.
Load paper and press the
or button.
A paper jam has occurred.
Remove the paper and press the
or
button.
Initial ink charging may not be complete. See the Start Here poster to complete initial ink
charging.
The
b
light and
B
light ash alternately.
An ink pad is nearing or at the end of its
service life.
The ink pads need to be replaced.
Contact Epson or an authorised Epson service
provider to replace the ink pad *1. It is not a user-
serviceable part.
When a message saying that you can continue
printing is displayed on the computer, press the
or button to continue printing. The lights
stop ashing for the time being, however, they will
continue to ash at regular intervals until the ink pad
is replaced.
A printer error has occurred. Open the scanner unit and remove any paper or
protective material inside the printer. Turn the power
o
and on again.
If the error continues to occur after turning the power
o and on again, contact Epson support.
Wi-Fi connection error has occurred. Press the button to clear the error and try again.
User's Guide
Solving Problems
96
To Next Page
Loading...
Need help?
General
Weight and Dimensions
