❏ When vertical banding appears or the paper is smeared, clean the paper path.
❏ Place the paper on a at surface to check if it is curled. If it is, atten it.
❏ When performing manual 2-sided printing, make sure that the ink is completely dry before reloading the paper.
Related Information
& “Loading Paper in the Rear Paper Feed” on page 30
& “Cleaning the Paper Path” on page 82
Printed Photos are Sticky
You may be printing on the wrong side of the photo paper. Make sure you are printing on the printable side.
When printing on the wrong side of the photo paper, you need to clean the paper path.
Related Information
& “Cleaning the Paper Path” on page 82
Images or Photos are Printed in Unexpected Colors
When printing from the Windows printer driver, the Epson auto photo adjustment setting is applied by default
depending on the paper type. Try change the setting.
On the More Options tab, select Custom in Color Correction, and then click Advanced. Change the Scene
Correction setting from Auto Correct to any other option. If changing the setting does not work, use any color
correction method other than PhotoEnhance in Color Management.
Related Information
& “Adjusting the Print Color” on page 51
Colors
Dier
from What You See on the Display
❏ Display devices such as computer screens have their own display properties. If the display is unbalanced, the
image are not displayed with proper brightness and colors. Adjust the properties of the device.
❏ Light shining into the display has an eect on how the image is seen on the display. Avoid direct sunlight and
conrm
the image where an appropriate illuminance is assured.
❏ Colors may dier from what you see on smart devices such as smart phones or tablets with high-resolution
displays.
❏ Colors on a display are not quite identical to those on paper because the display device and the printer have a
dierent
process of producing colors.
User's Guide
Solving Problems
113
To Next Page
Loading...
Need help?
General
