166
Projector Information Display - Info Menu
You can display information about the projector and input sources by viewing the Info menu. However,
you cannot change any settings in the menu.
Note: Available settings depend on the current input source. The lamp usage timer does not register any
hours until you have used the lamp for at least 10 hours.
Information item Description
Projector Info See the table below
Version Displays the projector's firmware version
Temp Warning Info Displays various high temperature warnings
Power On/Off History
(PowerLite 992F/1288)
Displays the projector's power on and power off history
Projector Info menu
Information item Description
Lamp Hours Displays the number of hours (H) the lamp has been used in Power
Consumption modes; if the information is displayed in yellow, obtain
a genuine Epson replacement lamp soon
To Next Page
Loading...
Need help?
General