90
Flow for publishing discs
This section describes how to publish discs with EPSON Total Disc Maker.
See “Screen configuration of EPSON Total Disc Maker” on page 43 in this guide for the screen configuration of
EPSON Total Disc Maker.
Registering write data
Register write data in the disc view of EPSON Total Disc Maker.
This section describes an example of the procedure to publish photo data CDs.
1
Start EPSON Total Disc Maker.
See “Starting EPSON Total Disc Maker” on page 42 in this guide for the start procedure.
The disc view appears.
2
Select [Data CD] for [Type], and click [Apply].
See “Printer Driver Basics” on page 70 in this guide for printing data created with other
software.
There is no need to register write data if you only want to print disc labels.
If the disc type you want to publish differs from that set for the input stacker, ask the
administrator to change the disc type of the input stacker.
Note
Note
To Next Page
Loading...
Need help?
General
