B
Remove the jammed original.
C
Close the scanner cover.
Others
The control panel display keeps
turning off.
o
Is the printer in sleep mode?
Sleep mode is exited if a print job is received or the
screen of the control panel is touched. The delay
before entering sleep mode can be changed from
the Basic Settings menu.
U “General Settings - Basic Settings” on page 136
Color ink runs out quickly even
when printing in the Black&White
mode or when printing black data.
o
Color ink may be consumed even when
printing in black and white mode, or when
printing black data.
o
Color ink is also consumed during the print
head cleaning process.
When performing Head Cleaning or Powerful
Cleaning, ink of all colors will be consumed even if
black and white mode is selected.
The paper is not cut cleanly.
o
Replace the cutter.
If the paper is not cut cleanly, replace the cutter.
U “Replacing the Cutter” on page 183
A light is visible inside the printer.
o
This is not a failure.
The light is a light inside the printer.
The administrator password has
been lost
o
Should you forget the administrator password,
contact your dealer or Epson Support.
Print head is automatically cleaned
o
To ensure print quality, the printer may
automatically perform head cleaning when the
printer is turned on, or before starting printing.
The printer turned off due to a
power cut
o
Turn off the printer, and then turn it back on.
When the printer is not turned off normally, the
print head may not be capped correctly. If the print
head is left uncapped for a long time, the print
quality may decline.
When you turn on the printer, capping is performed
automatically after a few minutes.
SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
Problem Solver
199
To Next Page
Loading...
Need help?
General