9
Handling the Printer Safely
Notes on Consumables
Other Information
The UVLED controller on this printer contains hydrofluorocarbons (HFC).
For USA only
The inks for this printer were specifically designed for its use only. Use of these inks in process for which they were
not designed is not recommended. One or more of these inks contain a substance subject to a TSCA section 5 SNUR
codified at 40 C.F.R. 721.5185. Please refer to 40 C.F.R. Part 721 and 40 C.F.R. 721.5185.
DWARNING
If ink is not handled correctly, it can have a detrimental effect on the body. Before using this
printer, be sure to read the Safety Data Sheet (SDS) and follow the instructions. You can
download the safety data sheet from Epson's Website at www.epson.com.
Post the guidelines described in the SDS in your workplace and ensure workers are aware of
them.
Be sure to read the notes on the label of the ink bottles carefully.
Read and follow instructions in the SDS for other chemicals such as cleaning liquid, anti-freeze,
and grease.
Avoid allowing un-cured print media to come into contact with your skin. When ink has not
been cured, handle the print outs with gloves.
DCAUTION
Be careful not to spill the ink.
Do not subject the ink bottles to shocks. Otherwise, ink may leak.
Store ink bottles and cleaning liquid in storage facilities designed for flammable liquids.
Type of F-Gas: R410A
Total F-Gas mass (kg): 0.5
Total eq(CO2-kg): 1045
GWP: 2090
When disposing of the printer, be sure to follow the rules and regulations of your country and region.
To Next Page
Loading...
Need help?
General
