Confidential
Troubleshooting Fatal Error Code List 14
Epson Stylus SX230 series / SX235W series / SX430W series / SX440W series Revision B
1.3 Fatal Error Code List
This section describes how to check the fatal error code, description, and the possible causes.
1.3.1 Displaying the Fatal Error Code
The fatal error code is stored in the EEPROM on the Main Board and can be read out using the Adjustment
Program. The code can be displayed on the LCD of the control panel by a special panel operation.
The following describes the panel operation for SX230 series, SX430W series and SX440W series to display the
fatal error code.
Method of displaying the fatal error code
1. Press the following buttons simultaneously while the fatal error is occurring.
Home button
Stop button
OK button
Figure 1-1. Displaying the Fatal Error Code (1)
2. Check the displayed fatal error code.
Figure 1-2. Displaying the Fatal Error Code (2)
Since SX235W series does not have LCD, use the Adjustment Program to check the fatal
error code.
Only the printer fatal error code can be displayed by this panel operation.
For the fatal error codes, descriptions, and their possible causes, see " 1.3.2 Printer Fatal
Error Code (p15)".
Home button OK button Stop button
LCD display
Fatal error code
FATAL CODE:0x02
To Next Page
Loading...
Need help?
General